BPTGB - TONER (TK-8E) FOR KYOCERA LASER PRINTER
- MSDS: BPTGB
- Manufacturer: KYOCERA CORP
- Product Name: TONER (TK-8E) FOR KYOCERA LASER PRINTER
- National Stock Number: 6850-00N033582
Product Identification
Product ID:TONER (TK-8E) FOR KYOCERA LASER PRINTER
MSDS Date:11/07/1991
FSC:6850
NIIN:00N033582
MSDS Number: BPTGB
Responsible Party
WATARNI-GUN MIE-PREF. 519-04 JAPAN
Emergency Phone: JAPAN 0596-58-4114;USA 510-748-6666
Info Phone: JAPAN 0596-58-4114;USA 510-748-6666
Preparer: Y. HATOYAMA
Cage: 0CVX8
Contractor
Telephone: 415-748-6680
Cage: 0CVX8
Ingredients
POLYESTER RESIN
CAS: 99546-37-9
Fraction By Weight: 87.3%
PROPENE POLYMERS; (POLYPROPYLENE WAX)
CAS: 9003-07-4
RTECS: UD1842000
Fraction By Weight: >4.5%
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: <7.7%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
SILICA (SIO*2) TYPE NOT SPECIFIED
CAS: 68611-44-9
Fraction By Weight: >0.5%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN CONTACT:NON-IRRITATING,
NON-TOXIC. EYE CONTACT:DUST OF THE PRODUCT MAY CAUSE IRRITATION.
INHAL:DUST OF THE PRODUCT MAY CAUSE LUNG IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
First Aid
First Aid:SKIN:WASH W/SOAP & WATER. INHAL:REMOVE FROM EXPOSURE.
EYE:IMMEDIATELY FLUSH W/WATER FOR AT LEAST 15 MINUTES. INGEST:CALL
MD.
Fire Fighting
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:SWEEP UP OR CLEAN UP W/VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP IN A CLOSED PACKAGE.
Other Precautions:NO OTHER SPECIAL PRECAUTION FOR SAFETY REASON IS
NECESSARY.
Exposure Controls
Respiratory Protection:NORMALLY NOT REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST VENTILATION PREFERABLE. MECHANICAL (GENERAL)
VENTILATION ACCEPTABLE.
Protective Gloves:NORMALLY NOT REQUIRED.
Eye Protection:NORMALLY NOT REQUIRED.
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:284F,140C
Spec Gravity:1.5 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER, ALMOST NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO*2.
Disposal
Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED/INCINERATED IN A
CLOSED PACKAGE UNDER THE CONDITIONS WHICH MEET FEDERAL, STATE &
LOCAL REGULATIONS. (FOR PREVENTION OF DUST).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.